Required Materials:

• Furniture Grade Plywood or MDF.
• Furniture Grade Adhesive such as Fevicol Heatex.
• Wide paint roller for applying adhesive.
• Electric saw or blade.
• Level and fine tip marker to draw lines onto wall.
• Sand paper/Emery Paper.

Leather Panel Installation Instructions

Leather panels should be the last surface installed in a room. They should be taken out of their box and plastic wrap only at the time of installation.

1. Leather panels should only be installed on furniture grade (sanded) plywood or mdf. Panels will not properly adhere to drywall or paint. You can install furniture grade plywood or mdf over existing drywall by screwing directly into the wall.

2. Fill any screw holes, cracks and seams with fillers. Sand the surface smoothly. Wipe down and let dry so that the surface is dust free.

3. Draw out several horizontal and vertical lines, using a level, in the center of your wall. This will be your starting point and you should work outwards from here.

4. Using a roller, spread out the adhesive onto the wall and onto the panels. Allow the adhesive to cure for 10-15 minutes.

5. After the adhesive coat turns clear, start applying the panels to the wall according to the pre-drawn lines.

6. Ensure the panel is placed perfectly, as the adhesive will instantly grab the panel. Gently push the panel against the wall, then apply significant pressure to bond the entire panel to the wall, especially the edges and corners.

7. Continue to install all panels until you reach the edges. You may cut the panels to size for use along the edges of the installation using an electric saw or blade.